API 594 / ASME B16.34
Tilting Disc Check Valves are configured for lower pressure drop and fast closure in demanding process or pipeline systems. Buyers can compare pressure class, size, materials, end connections and operation, then match the valve to the piping class and service conditions.
Available Pressure Classes
Choose the class required by your piping specification to review typical materials, end connections, applications, testing and RFQ information.
Specifications
| Design Standard | API 594 / ASME B16.34 |
|---|---|
| Size Range | 2–48 in |
| Pressure Classes | Class 150, Class 300, Class 600, Class 900, Class 1500, Class 2500 |
| Body Materials | WCB, LCC, CF8M, Duplex 2205, Alloy Steel |
| End Connections | Wafer, RF, RTJ, BW |
| Operation | Manual, gear or actuated where applicable |
Selection Guide
Start with the piping class and service conditions, then review disc motion, hinge or spring behavior, closure response and seat design. For quotation, include orientation, flow direction, allowable pressure drop, closure behavior, body material and end connection.
Save a PDF summary of the product range, technical specifications, available configurations and RFQ information.
Download PDF DatasheetMaterials
Typical project material options include WCB, LCC, CF8M, Duplex 2205, Alloy Steel. Final material selection should follow corrosion conditions, design temperature, toughness requirements and the approved material specification.
End Connections
Available connection families include Wafer, RF, RTJ, BW. The final facing or weld preparation must match the piping class and approved drawing.
Applications
Pump discharge, compressor discharge, process lines, pipelines and utility systems. Final suitability depends on fluid, pressure, temperature, cycling and the project specification.
Testing & Documentation
Confirm the required pressure test standard, material certificates, PMI or NDE scope, dimensional inspection, coating records and final document package before production.
Buyer Questions
This product family is organized in Class 150, Class 300, Class 600, Class 900, Class 1500, Class 2500. Confirm the required class from the piping specification before quotation.
Typical project options in this range include WCB, LCC, CF8M, Duplex 2205, Alloy Steel. Final material selection depends on fluid, design temperature, corrosion conditions and the approved material specification.
Include valve size, pressure class, body and trim material, end connection, operation, quantity, service conditions, testing and documentation requirements.
Engineering Resources
Send size, pressure class, materials, end connection, quantity and service conditions for review.
